Heater Ducting

 

We offer a complete line of sock and ducting products to meet your industrial heating requirements. Specialty fabrics are utilized to create products capable of delivering indirect-fired preheated air from ground heating equipment to various shelters and equipment.

Applications include industrial, commercial and residential work area heating, equipment heating, special events, drying, construction curing and more.


Canvas Heater Sock

JetSOX
 ___________________________________________________________
Features
  • Low cost solution for heat delivery.
  • 30% lighter than Canvas and three times tear, puncture and tensile resistant.
  • High-temperature (500°F) silicone fabric liner on inlet end.
  • Internal coiled wire helix prevents collapse and supports bending.
  • Two attached webbing straps for storage and transport.
  • No strong odor.
  • Standard end finish includes a flexible steel Pinlock coupling (edges are deburred for safety).
Specifications
   
STANDARD CONFIGURATION 12" x 12' (305mm x 3.7m)
6" x 15' (152mm x 4.6m)
STANDARD COLOR Yellow
TEMPERATURE RATING -65 to 350°F (-54 to 176°C)
END FINISH OPTIONS Pinlock (12" diameter)
J-Lock (6" and 12" diameters)
Fabric Characteristics
Polyester reinforced fabric with urethane topcoat and a high-heat Silicone (500°F) fabric starter section. Both are flame resistant.

TFG High Temperature Heater Sock

TFG-SOX
 ___________________________________________________________
Additional Applications
Oil & Gas construction area heating

Features

  • The low coefficient of friction on the fabric surface prevents flammable oil substances from sticking, resulting in extended flame-resistance and safety.
  • Construction includes an internal coiled wire helix to prevent collapse and to support bending.
  • Two attached straps for storage and transporting.
  • Standard end finish includes a flexible steel Pinlock coupling (edges deburred for safety).
Specifications
   
DIAMETER 12" (305mm)
STANDARD LENGTH 12' (3.7m)
STANDARD COLOR Grey
TEMPERATURE RATING -60 to 550°F (-51 to 288°C)
FABRIC WEIGHT 17 oz/yd² (576g/m²)
END FINISH Pinlock Coupling
Fabric Characteristics
Grey PTFE (Teflon™) coated fiberglass fabric provides exceptional flame, abrasion and chemical resistance.

NR-W Heater Duct

JetFLEX
 ___________________________________________________________
Features
  • External wearstrip attached to protect from ground abrasion.
  • Spiral wire reinforcement is captured between two layers of fabric, increasing airflow performance when compared to heater socks.
  • Standard end finish is a soft cuff with strap on the air inlet and a wire round end ring on the air outlet.
  • Assembled with high-strength (lock-stitch) sewn construction.
  • Duct maintains flexibility in cold weather conditions.
Specifications
   
DIAMETER RANGE 6 – 36” ID (152 to 915mm)
STANDARD LENGTH 25’ (7.6m)
STANDARD COLOR Yellow with grey high heat starter
TEMPERATURE RATING -65 to 375°F (-53 to 190°C)
STANDARD END FINISH Cuff with Strap & Buckle / End Ring
Fabric Characteristics
Polyester reinforced fabric with urethane topcoat and a high-heat Silicone (500°F) fabric starter section. Both are flame resistant.

HT-W Heater Duct

JetStream
 ___________________________________________________________
Features
  • High-strength (lock-stitch) sewn construction.
  • External wearstrip protects from ground abrasion.
  • Spiral wire reinforcement is captured between two layers of fabric, increasing airflow performance when compared to heater socks.
  • Standard end finish is our wire round end ring.
Specifications
   
DIAMETER RANGE 6 – 36” ID (152 to 915mm)
STANDARD LENGTH 25’ (7.6m)
STANDARD COLOR Grey
PITCH 4” (10cm) Return Air
7" (18cm) Discharge / Supply Air
TEMPERATURE RATING -65 to 500°F (-53 to 260°C)
FABRIC WEIGHT 17 oz/yd² (576g/m²)
Fabric Characteristics
Grey silicone coated fiberglass fabric, maintains flexibility in cold weather conditions and has flame and abrasion resistant properties.

Go to End Finishes and Accessories page

 

© 2015 Engineered Performance™ Ducting